Nuna RELX Base Installation Guide
How to Install the Nuna RELX Base
Whether you purchased your Nuna RELX Base individually or are looking to install the one that came with your Pipa RX, Pipa Lite R, or Pipa Lite RX – Our newest video is the simplest way to learn how to install it safely in minutes. While a secure baby is always top priority, convenience is something else to consider; one that every Pipa car seat can accommodate being compatible with the Nuna RELX. Follow these instructions step-by-step and you’ll be ready to go on adventures in no time.
Colored indicators take the guesswork out of installation, and the bubble-free, numbered, on-the-go recline means you can change positions as your baby grows without having to uninstall the base. The lock-off with an easy-access belt path makes it simple to install with the vehicle belt. The smooth platform won't take a toll on your vehicle seats, and the low profile allows for easier loading of any Nuna PIPA series infant car seat. Now you can spend those extra precious minutes with your baby instead of having to wrangle with the car seat! The PIPA RELX base also features a steel-reinforced rigid latch adjusting across four positions for a better fit against your vehicle seat.
Step by Step Guide
Hi, Enelio from Bambi Baby, and if you own a Nuna RELX base, how easy is it to install? You're done. Now I'm going to take you through a step-by-step process on how to get this set up for such an easy installation.
Step 1: pull the trigger and release your load leg.
Step 2: reset your latches by flipping it all the way forward. It resets all the way out.
Step 3: locate your anchor points in your vehicle. Then just install the Isafix into your anchor points. Once it's in place, push into the seat to engage that ratchet to close the gap of the seat.
Step 4: Then finally, drop the load leg down to the floor. Make sure you do not have any rubber mats on the floor, and you have a perfect installation of the Nuna RELX base.
The RELX base can be purchased individually and it works with all of the PIPA’s. However, it comes with the PIPA RX, the PIPA Lite R, and the PIPA Lite RX.
Product Features:
- True lock™ installation makes set up swift, simple and above all – safe
- 5 second install
- Crumple zone within the stability leg absorbs impact and minimizes force transferred to baby
- Colored installation indicators confirm correct connections to the vehicle.
- 4 positions on-the-fly recline
- bubble free recline angle guides clearly confirm the perfect riding angle
- low profile base for easier loading of infant seat
- open belt bath for easier install
- belt guides
- anti rebound panel
- automatic rigid latch storage
- extra convenient load leg storage with lock
- steel reinforced true lock™ rigid latch
- 4 position adjustable rigid latch to remove or reduce the gap between vehicle seat and base
- Locking 3 piece steel stability leg has a wide range of adjustment to fit most vehicles including middle seats
- seat belt lock off with separate lap and belt paths
- indicators on rigid latch turn green when clicked to vehicle anchor points
- indicators on stability leg turn green when in proper contact with vehicle floor
- steel stability leg helps minimize forward rotation during impact up to 90% (when compared to a system that is not using a stability leg)
Safety Features:
- steel reinforced true lock ™ rigid latch
- 4 position recline on base
- 4 position adjustable rigid latch
- open belt path
- belt guides
- latch guides